Laboratory Equipment
-
Heating & Tempering
BOD INCUBATOR, PRO
The BOD-P series BOD incubators combine advanced touch-screen control, advanced PID technology, and uniform forced-air circulation to deliver precise and stable temperature conditions, ideal for BOD testing and critical laboratory applications.
Product Features:
- 7” TFT touch-screen controller with advanced PID control
- Built-in programmable timer for flexible operation
- Intelligent door-open sensing with alarm
- Date-time stamped process and event data logging
- Online / offline data recording with time stamping
- Energy-efficient design with optimized power consumption
- Alarms for high/low temperature deviation, door open, and timer end
- Optional mains-failure alarm and automatic changeover to battery/inverter
- Door safety sensor for operational cut-off
- Independent over-temperature safety cut-off
- Validation port for external temperature monitoring
- LED interior illumination
- Double-door construction with inner toughened-glass door
- RS485 PC interface with 21 CFR Part 11 compliant software for data recording, audit trails, reports, and email alerts
Technical Specifications:
- Temperature Resolution: 0.1°C
- Temperature Accuracy: ±1°C
- Temperature Uniformity: ±1°C
- Display: 7-inch TFT colour touch screen
- Controller: Micro-PLC-based tuned PID
- Timer range: 5 seconds to 999 hours
- Temperature sensors: 1 control sensor and 4 mapping sensors
- Data storage: Built-in flash memory, 5,000 records
- Recording interval: Programmable from 1 to 250 minutes
- Air Circulation: Forced air circulation
- Cooling System: Hermetically sealed, CFC-free compressor
- Inner Chamber Material: SS-304
- Power Supply: 230 V AC, 50 Hz
- Safety: Over-temperature thermostat, door safety cut-off, leakage-current protection, and fuse / MCB protection according to capacity
- CE Marked
- Temperature Range: +10°C to +60°C
BOD-P -
Miscellaneous
Digital Autoclave, Heavy Duty
supertek’s digital autoclave provides a physical method for disinfection and sterilization. It sterilizes using a combination of steam, pressure, and time to kill micro-organisms and spores. It is used in healthcare and industrial applications.
Features:
- PID for precise temperature control
- Heavy-duty stainless-steel chamber
- Low water level indicator with automatic cut-off
- LED display for showing actual and set temperature
- The top lid is fitted with a pressure gauge and two safety valves
- Lid locks with the chamber against a rubber gasket using swivel wing nut bolts
Technical Specifications:
- CE certified
- Heater: 2kW
- Capacity: 20 L
- Overload protection
- Pressure: 15 psi / 22 psi
- Sterilization time: 15 to 20 mins
- Container size: 300 x 300 mm (OD x H)
- Working temperature: 121°C – 140°C
- Input voltage: 220 V AC ± 10%, 50/60 Hz
- Overall size: 500 x 400 x 500 mm (L x W x H)
- Stainless steel chamber wall thickness: 3 mm
CH11027D -
Heating & Tempering
Laboratory Incubator
Laboratory incubators are used for incubating microbiological cultures. These incubators ensure stable and reliable incubation; and guarantee reproducible results for routine tests in the
laboratory. Forced air convection offers higher temperature uniformity, lesser energy consumption, and quicker set temperatures as compared to natural convection.Features:
- Manually adjustable air flaps for fresh Air
- Caster wheels for easy movement (Optional)
- PID controller for precise temperature control
- Process Timer, Open door alert, Fan failure alert
- Stainless steel interior, Powder-coated exterior
- Glassdoor for observing samples inside the chamber during operation
- Superior insulation for lower energy consumption and better performance
- Forced air convection produces faster temperature response rates, improves uniformity and reduces fluctuation
Technical Specifications:
- CE Marked
- Overload protection
- Timer: Up to 9999 minutes
- Maximum shelf load: 15 kg
- Temperature accuracy ±0.5°C
- Input voltage: 220 V AC ±10%, 50/60 Hz
- Temperature range: Ambient +5°C to 70°C, resolution 0.1°C
- Timer Range: Up to 9999 minutes
CH11175F
Note: stainless-steel incubators are available on request.
CH11175F -
Miscellaneous
Melting Point Apparatus
This product is used to determine the melting points up to 450°C. We can measure 3 samples simultaneously. The temperature is regulated by the knob fitted on front panel. A white LED is given inside the unit for clearest view of the melting process. A lens window is also provided at front panel for the best view of melting process. We Can Also Change the Background behind the capillary tubes with the help of a knob given at the back side.
CH11513B -
Miscellaneous
UV CABINET
The UV Cabinet is a compact desktop disinfection unit designed for UV-C disinfection of small tools and objects. It is equipped with two internal 254 nm UV-C lamps to provide effective exposure within the chamber. The unit offers simple operation, compact dimensions, and a safety interlock system.
Features
- 45 L chamber capacity
- Effective disinfection using two built-in 254 nm UV-C lamps
- Adjustable digital timer for convenient operation
- Easy-to-clean stainless-steel racks.
- Interlocking safety system automatically turns off UV light when the door is opened
- Compact desktop design
Specifications
- Power: 30 W
- UV Wavelength: 254 nm
- Timer: Digital, up to 30 minutes
- Internal Chamber Size: 355 x 355 x 355mm (w x d x h)
- Input Voltage: 220 V AC ±10%, 50/60 Hz
CH12040D
CH12040SD -
Separation
Clinical Centrifuge
The CLC-5K is a high-performance clinical centrifuge designed for routine laboratory, diagnostic, and research use. Its stainless-steel chamber, solid construction, and precision balanced motor ensure smooth and stable operation. The unit accommodates multiple rotor options, making it ideal for processing blood collection tubes, centrifuge tubes, and PCR plates.
Features:
- High-speed swing-out rotor for efficient sample separation
- Stainless steel chamber for durability and easy cleaning
- Digital control of speed and time for precise operation
- Quiet, low-vibration performance with auto-balance system
- Safety interlock lid prevents opening during operation
- Multiple rotor compatibility for versatile applications.
Technical Specifications:
Product Code CLC-5K Maximum Speed 5,000 rpm Maximum RCF 4,980 × g Timer Range 10 s–99 min 59 s Chamber Material Stainless steel Display LCD display (speed, time, RCF) Safety Lid interlock, imbalance detection Power Supply AC 220 V / 110 V, 50/60 Hz Pack Size 1 Certification CE Marked CLC-5K -
Miscellaneous
COD Digestion Unit
COD Digestion Unit is a high-performance solution for rapid and precise digestion of organic pollutants in water samples. It simplifies COD analysis for labs and industries with user-friendly controls, safety measures, and sturdy build. The COD Digestion Unit is used to determine Chemical Oxygen Demand in effluents.
Features:
- Air Condensers
- Insert a rack to hold the digestion tube with an air condenser
- Digital PID temperature indicator cum controller with a built-in timer for temperatures up to 250 C
- Aluminium block heating unit with provision to keep 8 or 15 samples at a time in 40 mm diameter reaction vessels
- CE Marked
Technical Specifications:
- Controller: Digital PID Controller for precise control
- Input voltage: 220 V AC +/- 10%, 50/60 Hz
COD -
Heating & Tempering
Water Bath, Basic
These digital water baths are ideal for general laboratory use. The water baths are economical, reliable, and have high-temperature accuracy.
Features:
- With non-slip rubber feet
- Features timer with auto alarm settings
- PID controller for precise temperature control
- LED display for showing actual and set temperature
- The outer body is made of powder-coated mild steel
- Includes flat stainless-steel cover, perforated shelf, and a drain outlet
- High-quality, corrosion-resistant seamless stainless-steel tank for easy cleaning
Technical Specifications:
- CE Marked
- Overload protection
- Timer: Up to 9999 minutes
- Resolution 0.1°C, accuracy ±0.5°C
- Input voltage: 220 V AC ±10%, 50/60 Hz
- Temperature range: Ambient +5°C to 99°C
- Timer Range: Up to 9999 minutes
CH10124D/6
CTWB -
Heating & Tempering
Triple Water Bath
Triple water baths feature three independently controlled unstirred water baths in one unit.
Features:
- Process indication
- With non-slip rubber feet
- Low water indication with auto cut-off
- The outer body is made of powder-coated mild steel
- Each tank includes a flat stainless-steel cover and perforated shelf
- Each tank is independently controlled by a built-in electronic circuit card
- Includes three high-quality, corrosion-resistant, and easily cleanable seamless stainless-steel tanks
Technical Specifications:
- CE Marked
- Overload protection
- Temperature accuracy ±1°C
- Input voltage: 220 V AC ±10%, 50/60 Hz
- Temperature range: Ambient +5°C to 99°C
CH10124T
CTWB-B -
Heating & Tempering
Water Bath Digital
This high-performance advanced digital water bath ensures a stable and controlled temperature environment, making it ideal for quality control and laboratory applications.
Features:
- Precise digital PID temperature control
- LED display for actual and set temperature
- Features timer
- Concealed heater for easy cleaning
- Corrosion-resistant stainless-steel tank
- Chemical-resistant, anti-bacterial painted outer body
- Side handles for easy transport
- Bath fitted with non-slip rubber feet.
- Includes drain in all models
Technical Specifications:
- CE Marked
- Temperature range: Ambient +5°C to 99°C
- Resolution 0.1°C, accuracy ±0.5°C
- Timer: Up to 9999 minutes
- Overload protection
- Input voltage: 220 V AC ±10%, 50/60 Hz
CTWB-D -
Heating & Tempering
Electric Bunsen burner
The Electric Bunsen Burner provides laboratories with a safe, flame-free alternative to conventional gas Bunsen burners. A high-power heating element, combined with a reflective internal stainless-steel bowl, generates a concentrated and uniform stream of heat that closely matches the performance of traditional gas-operated burners.
Product Features:
- Flame-free electric operation for safer laboratory heating
- Durable, heat-resistant housing for safe operation during high-temperature use
- LED indicator for clear heater operation status
- High-power heating ensures consistent and reliable heat output
- 130 mm heating area for efficient and focused heating
- Reflective internal stainless-steel bowl for concentrated, uniform heat
Technical Specifications:
- Body material: heat-resistant thermoplastic
- Input voltage: 230 V AC, Single Phase, 50/60 Hz
- Power consumption: 500 W
- Heating element (heater) surface temperature: up to +720 °C
- Working surface temperature: +37 °C to +500 °C (max)
- Heating area: 130 mm diameter
- CE Marked
EBB-A -
Mixing
Grid Thermal Mixer
The Grid Thermal Mixer is designed for precise temperature control combined with uniform mixing. Equipped with dual heating and cooling functions, advanced microprocessor control, and interchangeable blocks, it is ideal for molecular biology, biochemistry, clinical, and other life science applications.
Product Features:
- All-in-one versatile device: Mixing, heating, and cooling
- Microprocessor control ensures accurate temperature, speed, and timing.
- LCD display for simultaneous display of temperature, time, and shaking speed
- Adjustable shaking speed for thorough and uniform mixing.
- Interchangeable blocks to accommodate different tube sizes and applications.
- Built-in safety protection system with over-temperature alarm.
- Compact design with quiet operation.
- Automatic recognition of the module.
- Optional thermal cover available for improved temperature uniformity
Technical Specifications:
- CE Marked
- Temperature Range: –10 °C below ambient to +100 °C
- Temperature Accuracy: ±0.5 °C
- Temperature Uniformity: ±0.5 °C
- Shaking Speed Range: 200 – 1500 RPM
- Timer Range: 1 min – 99 h 59 min
- Mixing Mode: Orbital shaking
- Power Consumption: 150W
- Power Supply: AC 220 V / 110 V, 50/60 Hz
- IP Rating: IP21
Scope of Supply
- Main unit
- Instruction Manual
- Power cord
- At least one interchangeable block to be selected as per application
- Interchangeable blocks and thermal cover are optional accessories and supplied only when ordered separately
GTM-100 -
Separation
Hematocrit Centrifuge
Supertek’s Hematocrit Centrifuge is a compact digital centrifuge designed specifically for hematocrit determinations. It offers high-speed operation with accurate control, and is compatible with 75 mm capillary tubes, ideal for clinical and diagnostic labs.
Features:
- Compatible with 75 mm hematocrit capillaries.
- Wide speed range for flexible applications.
- LCD display for easy monitoring.
- Compact and maintenance-free design.
- Lid lock and auto stop for safety.
- Easy installation of rotor..
Technical Specifications:
Product Code HMC-75 Speed Range 500–12,000 RPM Max RCF 13,680 × g Timer 30 sec–99 mins Rotor Compatibility Fits 75 mm Capillary Tubes, 24 Nos Input Power 110–220 V AC ±10%, 50/60 Hz Pack Size 1 Certification CE Marked HMC -
Heating Mantles
Heating Mantles, Analog
Supertek’s heating mantle is a dependable and cost-effective solution for your laboratory’s basic heating requirements. Designed for use with round-bottom glassware, it provides efficient uniform heating for a wide range of applications. It is supplied with a robust MS (mild steel) rectangular body for improved strength, stability and a uniform design across the range.
Product Features:
- With non-slip rubber feet
- For use with round bottom flasks
- Includes support rods and boss head
- Heat liquid solutions placed in round bottom flasks
- Heat is controlled with an in-built electronic circuit card
- The outer body is made from powder-coated MS (mild steel), rectangular construction
- Glass fibre yarn knitted heating element provides uniform heating to the flask
Technical Specifications:
- CE Marked/CE Compliant
- Overload protection
- Input voltage: 220 V AC ± 10%, 50/60 Hz
- Temperature range of heating surface: Ambient + 5°C to 400°C
- IP Rating: IP20
Note: Heating element cording may be slightly brown in colour due to QC testing.
Scope of Supply
- Main unit
- Instruction Manual
- Power cord
- Support rod
- Boss head
- Probe clamp
HMRT -
Heating Mantles
Heating Mantles, Digital
Heating mantles are used to uniformly heat liquids placed in round bottom flasks. Insert the external probe in the liquid solution and measure/control the temperature of the liquid directly with these highly accurate digital heating mantles. It is supplied with a robust MS (mild steel) rectangular body across the complete range.
Product Features:
- With non-slip rubber feet
- Temperature probe PT100
- For use with round bottom flasks
- Includes support rods and boss head
- Precise temperature control with PID controller
- LED display for showing actual and set temperature
- Measure and control the temperature of liquid directly
- Outer body is made from powder-coated MS (mild steel), rectangular construction
- Glass fibre yarn knitted heating element provides uniform heating to the flask
Technical Specifications:
- CE Marked/CE Compliant
- Overload protection
- Input voltage: 220 V AC ± 10%, 50/60 Hz
- Temperature accuracy ± 0.5°C, Resolution 0.1°C
- Temperature range of PT100: Ambient + 5°C to 250°C
- Temperature range of heating surface: Ambient + 5°C to 400°C
- Timer: Up to 9999 mins
- IP Rating: IP20
Note: Heating element cording may be slightly brown in colour due to QC testing.
HMRT -
Mixing
Heating Mantle with Stirrer, Digital
supertek’s digital heating mantle with magnetic stirrer offers precise PID temperature control together with adjustable magnetic stirring in a single unit. Insert the PT100 probe to measure and control the liquid temperature directly. Supplied with a robust MS (mild steel) rectangular body.
Features:
- With non-slip rubber feet
- Temperature probe PT100
- For use with round bottom flasks
- Includes support rods and boss head
- Precise temperature control with PID controller
- LED display for showing actual and set temperature
- Built-in magnetic stirrer with adjustable stirring speed
- Independent temperature and stirring speed control
- Outer body is made from powder-coated MS (mild steel), rectangular construction
- Glass fibre yarn knitted heating element provides uniform heating to the flask
Technical Specifications:
- CE Marked/CE Compliant
- Overload protection
- Input voltage: 220 V AC ± 10%, 50/60 Hz
- Temperature accuracy ± 0.5°C, Resolution 0.1°C
- Temperature range of PT100: Ambient + 5°C to 250°C
- Stirring speed: Upto 1200 RPM
- Temperature range of heating surface: Ambient + 5°C to 400°C
- Timer: Up to 9999 mins
- IP Rating: IP20
Note: Heating element cording may be slightly brown in colour due to QC testing
HMSRT -
Heating Mantles
Heating Mantle with Stirrer, Analog
supertek’s heating mantle with magnetic stirrer combines uniform heating with continuous magnetic stirring in a single unit, ideal for reactions and dissolutions that require simultaneous heating and mixing. Supplied with a robust MS (mild steel) rectangular body.
Features:
- With non-slip rubber feet
- For use with round bottom flasks
- Includes support rods and boss head
- Built-in magnetic stirrer with adjustable stirring speed
- Independent heat control and stirring speed control
- Heat is controlled with an in-built electronic circuit card
- Outer body is made from powder-coated MS (mild steel), rectangular construction
- Glass fibre yarn knitted heating element provides uniform heating to the flask
Technical Specifications:
- CE Marked/CE Compliant
- Overload protection
- Input voltage: 220 V AC ± 10%, 50/60 Hz
- Stirring speed: Upto 1200 RPM
- Temperature range of heating surface: Ambient + 5°C to 400°C
- IP Rating: IP20
Note: Heating element cording may be slightly brown in colour due to QC testing.
HMSRT
+1 (630) 345-3450