-
Electronics
Geiger Muller Counter
Supertek’s Geiger muller counter immediately detects particles emitted by radioactive source, most commonly beta and gamma ray particles. The number of clicks heard over a period of time represents relative rate of decay for the radioactive source being sampled.
Specification:
Range:
- γRay – 20 to 120 mR/h
- βRay – 100 to 1800 mR/h
GM Tube:
- Diameter: Ø10 mm
- Total length: 90 mm
Product Features:
- Digital display.
- Continuous operation of up to 20 hours.
- Tare function to set the initial zero values.
- Portable and ergonomic hand-held design.
- For use in schools and other educational institutions.
- Includes rechargeable battery along with charger.
- Transparent cover to protect GM tube from breakage.
- Instantaneous and cumulative values are displayed simultaneously.
PH96060 -
Experiments
Pin Diode Characteristics Experiment
OBJECTIVES
- To study the response of PIN diode, in the following conditions:
- Photocurrent (Iph) vs Applied voltage at constant irradiance (Φ) under Reverse biased condition of the PIN diode.
- Current (I) vs Voltage (V) under forward bias condition of the PIN diode.
PRINCIPLE
The PN-Junction diodes, though versatile, have a few limitations regarding the amount of current they could handle before breakdown and also have low switching frequency, low power handling capacity, and low quantum efficiency. To overcome all these issues PIN diode was designed. PIN diodes are also extensively used as photodiodes in PIN photodiode configuration and are very important in optical fiber communication.
KEY FEATURES
- Precise Optical Alignment: The optical alignment of the components is attained by the optical bench, the set-up time is faster and experimentation is easy.
- Fine and Easy Light Intensity Adjustment: Light intensity adjustment is done via the use of two polarizers. This helps in easier and fine light intensity adjustments.
- Simple and Easy Connections: The color-coded terminals on the various components aid in the ease of connections thus reducing the setup time.
WHAT YOU NEED
- OB2 Optical Bench Set 0.4m 1
- HA001 Light Source Holder 1
- HA004 Polarizer Holder 1
- HA006 Analyzer Holder 1
- HA021 Photodiode Module Holder 1
- PH64505 Multimeter 1
- PH61022D/2 Power Supply for Light Source 2
Complete Equipment Set with Instruction Manual from catalogue.
PIN1-C -
Experiments
Planck Constant Experiment
OBJECTIVES
To determine Planck’s constant using LED.
PRINCIPLE
KEY FEATURES- Built-In Heater: The heating element is built into the system and is powered by 12V input. The efficient heating mechanism heats the system to the required temperature in a few minutes with a minimum power requirement of 40W.
- Modular Design: The modular design of the setup allows the testing of different colored LED’s.
- Built-In Voltage and Temperature Probe: All the necessary parameters to be measured are available directly on the setup itself.
WHAT YOU NEED
PH94004 Planck Constant Apparatus 1 PH61035D/5 Power Supply 1 PH64505 Multimeter 1 AC026 Syringe, 20ml 1 AC028 Silicone Oil, 50ml 1 Complete Equipment Set with Instruction Manual from catalogue.
PLC1-C -
Volumetric Flasks
Flask Volumetric With PP Super Stopper™, ISO “Class A” QR Coded
- Complies with ISO / DIN 1042 Class A
- QR- Code for quick access to calibration certificate
- Manufactured from 3.3 borosilicate glass for corrosion-free performance
- Individual certificate is supplied with the product & is also available on website
*without QR Code
#Hexagonal PP StopperQ22.402 -
Volumetric Flasks
Flask Volumetric, With Interchangeable Glass Stopper, ISO “Class A” QR Coded
- Complies with ISO / DIN 1042 Class A
- QR-coded for accurate & quick identification
- Made from 3.3 borosilicate glass for corrosion-free performance
- Individual calibration certificates available for each certified product
*without QR Code
#Glass Penny Head StopperQ22.403 -
Volumetric Flasks
Flask Volumetric, Amber With PP Super Stopper™, ISO “Class A”
- Complies with ISO / DIN 1042 Class A
- QR- Code for quick access to calibration certificate
- Manufactured from 3.3 borosilicate glass for corrosion-free performance
- Individual & Batch certificate is supplied with the product & is also available on website
- Individual certified products feature a QR code, whereas batch-certified products do not include a QR code.
*without QR Code
#Hexagonal PP StopperQ22.404 -
Volumetric Flasks
Flask Volumetric, Amber With Interchangeable Glass Stopper, ISO “Class A”
- Complies with ISO / DIN 1042 Class A
- QR- Code for quick access to calibration certificate
- Manufactured from 3.3 borosilicate glass for corrosion-free performance
- Individual & Batch certificate is supplied with the product & is also available on website
- Individual certified products feature a QR code, whereas batch-certified products do not include a QR code.
#Glass Penny Head Stopper
Q22.405 -
Volumetric Flasks
Flask Volumetric, Wide Mouth With PP Super Stopper™, ISO “Class A” QR Coded
- Complies with ISO / DIN 1042 standards
- Manufactured from 3.3 borosilicate glass for corrosion-free performance
- Individual certificate is supplied with the product & is also available on website
- Specially designed wide mouth for testing bigger dia. Tablet without making it in powder
- Printed with AW mark to denote Class A Wide Mouth Flask
# Non ISO size
Q22.410 -
Volumetric Flasks
Flask Volumetric, Color Coded, With PP Super Stopper™, ISO “Class A” QR Coded
- Calibrated at 20°C
- Color Coded for easy identification
- In Compliance to Class A ISO 1042
- Manufactured from 3.3 borosilicate glass for corrosion-free performance
- A calibration certificate is provided with each Individual certified unit & same is available on our website
Q22.417 -
Volumetric Flasks
Flask Volumetric, Amber Wide Mouth With PP Super Stopper™, USP “Class A” QR Coded
- Complies with USP standard
- Calibrated to contain (TC, IN)
- Manufactured from 3.3 borosilicate glass for corrosion-free performance
- Individual certificate is supplied with the product & is also available on website
- Printed with AW mark to denote Class A Wide mouth Flask
Q50.404 -
Volumetric Flask
Flask Volumetric, Wide Mouth With Super Stopper™ USP “Class A” QR Coded
- Complies with USP standard
- Calibrated to contain (TC, IN)
- Manufactured from 3.3 borosilicate glass for corrosion-free performance
- Individual certificate is supplied with the product & is also available on website
- Printed with AW mark to denote Class A Wide mouth Flask
* upto 20ml sizes are of trapezoidal shape
Q50.410 -
Experiments
Quinck’s Tube Experiment
Objectives
To measure the magnetic susceptibility of a given paramagnetic sample (FeCl3).
Principle
The Quinck’s method is used to determine magnetic susceptibility of diamagnetic or paramagnetic substances in the form of a liquid or an aqueous solution. When an object is placed in a magnetic field, a magnetic moment is induced in it. Magnetic susceptibility x is the ratio of the magnetization I (magnetic moment per unit volume) to the applied magnetizing field intensity H. The magnetic moment can be measured either by force methods, which involve the measurement of the force exerted on the sample by an inhomogeneous magnetic field or induction
methods where the voltage induced in an electrical circuit is measured by varying magnetic moment.Key Features
- Compact Setup – The apparatus design is compact and yet effective to perform the experiments with ease. The simple connections and stand to hold the teslameter probe, makes it easy to handle.
- Custom Quinck’s Tube – Specially designed quinck’s tube can be attached seamlessly on the setup and dimensions are controlled such that it fits perfectly between the pole pieces.
Equipments Needed for the Experiment
- PH94012 Electromagnet for Quinck’s Tube 1
- AC030 Quinck’s Tube 1
- PH61035D/7 Power Supply for Electromagnet 1
- PH93225G Teslameter, Digital 1
- PH30780 Vernier Microscope 1
QTE1-C -
Experiments
Quarter and Half Wave Plate Experiment
OBJECTIVES
To study the effect of wave plates on polarized light
- Quarter wave plate
- Half wave plate
PRINCIPLE
Waveplates are optical devices that resolve a light wave into two orthogonal linear polarization components by producing a phase shift between them. The transmitted light may have a different type of polarization than the incident beam due to the induced phase difference. Commonly used retarders are quarter-wave plates and half-wave plates. The quarter-wave plate is used to convert a linearly polarized input beam into a circular (or elliptical) polarized beam and vice-versa. Half-wave plate rotates the plane of polarization of linearly polarized light that is input on it by twice the angle between its optical axis and the initial orientation of the linearly polarized light.
KEY FEATURES
- Precise Optical Alignment: The optical alignment of the components is attained by the optical bench, the set-up time is faster and experimentation is easy.
- Digital Lux Meter: This enables the measurement of light intensity at various angles of reflection. The meter reads with a precision of 1 lux.
- Easy and accurate adjustments: The design of the setup helps in the easier rotation of wave plates without blocking the path of light. The least o count of 1 aid in accurate readings
WHAT YOU NEED
OB1 Optical Bench Set 0.8m 1 UP001 Upright 1 HA001 Light Source Holder 1 HA004 Polarizer Holder 1 HA006 Analyzer Holder 1 HA510 Light Sensor Holder 1 DP1 Data Processor 1 PH61022D/2 Power Supply for Light Source 1 HA030 Quarter Wave Plate Holder 1 HA031 Half Wave Plate Holder 1 Complete Equipment Set with Instruction Manual from catalogue.
QWP1-C
+1 (630) 345-3450