-
Mixing
Heating Mantle with Stirrer, Digital
supertek’s digital heating mantle with magnetic stirrer offers precise PID temperature control together with adjustable magnetic stirring in a single unit. Insert the PT100 probe to measure and control the liquid temperature directly. Supplied with a robust MS (mild steel) rectangular body.
Features:
- With non-slip rubber feet
- Temperature probe PT100
- For use with round bottom flasks
- Includes support rods and boss head
- Precise temperature control with PID controller
- LED display for showing actual and set temperature
- Built-in magnetic stirrer with adjustable stirring speed
- Independent temperature and stirring speed control
- Outer body is made from powder-coated MS (mild steel), rectangular construction
- Glass fibre yarn knitted heating element provides uniform heating to the flask
Technical Specifications:
- CE Marked/Compliant
- Overload protection
- Input voltage: 220 V AC ± 10%, 50/60 Hz
- Temperature accuracy ± 0.5°C, Resolution 0.1°C
- Temperature range of PT100: Ambient + 5°C to 250°C
- Stirring speed: Upto 1200 RPM
- Temperature range of heating surface: Ambient + 5°C to 400°C
- Timer: Up to 9999 mins
- IP Rating: IP20
Note: Heating element cording may be slightly brown in colour due to QC testing.H111
HMS-D -
Heating Mantles
Heating Mantle with Stirrer, Analog
supertek’s heating mantle with magnetic stirrer combines uniform heating with continuous magnetic stirring in a single unit, ideal for reactions and dissolutions that require simultaneous heating and mixing. Supplied with a robust MS (mild steel) rectangular body.
Features:
- With non-slip rubber feet
- For use with round bottom flasks
- Includes support rods and boss head
- Built-in magnetic stirrer with adjustable stirring speed
- Independent heat control and stirring speed control
- Heat is controlled with an in-built electronic circuit card
- Outer body is made from powder-coated MS (mild steel), rectangular construction
- Glass fibre yarn knitted heating element provides uniform heating to the flask
Technical Specifications:
- CE Marked/CE Compliant
- Overload protection
- Input voltage: 220 V AC ± 10%, 50/60 Hz
- Stirring speed: Upto 1200 RPM
- Temperature range of heating surface: Ambient + 5°C to 400°C
- IP Rating: IP20
Note: Heating element cording may be slightly brown in colour due to QC testing.72
HMSRT -
Heating & Tempering
Heat-On Block System
Efficient and safe heating blocks for round-bottom flasks (50 ml to 5000 ml), made from anodized aluminum for excellent heat transfer and chemical resistance. Compatible with all major hotplate stirrers. Eliminates messy oil baths, ensures uniform heating, and saves energy.
Product Features:
- Designed for safe, clean, and energy-efficient heating of Round Bottom Flasks (RBF) from 50 ml to 5000 ml.
- Manufactured from high-grade Aluminium for excellent heat conduction and durability.
- Available in Anodized Silver Finish
- Deep cavity design for maximum flask contact ensuring uniform heating.
- Compatible with all leading Hot Plate Stirrers up to 135 mm diameter.
- Equipped with a Temperature Sensor hole (3 mm Ø) for direct probe insertion.
- Reduced energy consumption compared to oil baths.
- Zero oil contamination, zero maintenance.
- Optional lifting handles for safe removal
Technical Specifications:
- Material – Aluminium
- Finish – Silver Anodizing
- Flask Holding Capacity – 50 ml, 100 ml, 250 ml, 500 ml, 1000 ml, 2000 ml, 3000 ml, 5000 ml.
- Maximum Temperature – Use Upto 260°C
HOB -
Heating & Tempering
Laboratory Hot Plate, Round
supertek’s laboratory hot plate is a reliable heating equipment designed for a wide range of laboratory applications. This instrument provides a durable and uniform heating
platform, making it excellent for a variety of processes such as sample preparation, chemical reactions, material testing, etc.Product Features:
- With non-slip rubber feet
- Includes support rods and clamps
- Round-shaped, cast-iron heating plate
- For general-purpose heating requirements
- MOC Body: Powder-coated mild steel body
- Heat is controlled with an in-built electronic circuit card
Technical Specifications:
- CE certified
- Overload protection
- Input voltage: 220 V AC ± 10%, 50/60 Hz
- Temperature range of hot plate: Ambient + 5°C to 350°C
CH11168B
HPR-A-8 -
Hot Plates
Laboratory Hot Plate, Rectangular, Analog
supertek’s laboratory hot plate is a reliable heating equipment designed for a wide range of laboratory applications. This instrument provides a durable and uniform heating
platform, making it excellent for a variety of processes such as sample preparation, chemical reactions, material testing, etc. These rectangular hot plates with large surface area
can be used for heating multiple solutions simultaneously.Features:
- With non-slip rubber feet
- Powder-coated mild steel body
- Includes support rods and clamps
- Rectangular-shaped, cast-iron heating plate
- For heating multiple solutions simultaneously
- Heat is controlled with an in-built electronic circuit card
Technical Specifications:
- CE certified
- Overload protection
- Input voltage: 220 V AC ± 10%, 50/60 Hz
- Temperature range of hot plate: Ambient + 5°C to 350°C
CH11170
HPRT-A -
Hot Plates
Laboratory Hot Plate, Rectangular, Digital
supertek’s laboratory hot plate, digital is an innovative heating solution developed to fulfil the precise demands of modern laboratories. These rectangular hot plates, with large
surface area can be used for heating multiple solutions simultaneously. Insert the external probe in the liquid solution and measure / control the temperature of liquid directlyFeatures:
- With non-slip rubber feet
- Temperature probe PT100
- Powder-coated mild steel body
- Includes support rods and clamps
- Rectangular-shaped, cast-iron heating plate
- For heating multiple solutions simultaneously
- Precise temperature control with PID controller
- LED display for showing actual and set temperature
- Measure and control the temperature of the liquid solution directly
Technical Specifications:
- CE certified
- Overload protection
- Input voltage: 220 V AC ± 10%, 50/60 Hz
- Temperature accuracy ± 0.5°C, Resolution 0.1°C
- Temperature range of hot plate: Ambient + 5°C to 350°C
CH11170D
HPRT-D -
Hot Plates
Laboratory Hot Plate, Rectangular SS, Digital
supertek’ s laboratory hot plate is a reliable heating equipment designed for a wide range of laboratory applications. This instrument provides a durable and uniform heating
platform, making it excellent for a variety of processes such as sample preparation, chemical reactions, material testing, etc. These rectangular hot plates with large surface area
can be used for heating multiple solutions simultaneously.Features:
- Durable Stainless-Steel top provides excellent resistance to corrosion and chemical spills, ensuring longevity and easy cleaning.
- Large heating surface with uniform heating
- Precise temperature control with PID controller
- LED display for showing actual and set temperature
- Measure and control the temperature of the solution directly
- Temperature probe PT100
- Includes support rods and clamps
- With non-slip rubber feet
Technical Specifications:
- Temperature range: Ambient + 5°C to 350°C
- Temperature accuracy ± 1°C, Resolution 1°C
- Input voltage: 220 V AC ± 10%, 50/60 Hz
- MOC Top Plate: Ceramic Coated stainless steel
- MOC Body: Powder-coated mild steel
- Overload protection
- CE certified
CH11170DC
HPRT-D -
Higher Science
Interferometer Experiment
Objectives
- To produce and observe the interference pattern.
- To measure the wavelength of laser source using the interferometer.
Principle
Phenomena of interference can be explained by the principle of superposition. Consider two E.M waves simultaneously propagating through the same region of space. The resultant electric field at any point in that region of space is the vector sum of the electric field of each wave. Depending on the strength of the resulting electric field at a point in space where the two waves superpose, we observe dark and bright regions in the interference pattern.
Key Features
- Easy to Setup – The apparatus is built on a sturdy and portable platform. The legs are height adjustable to aid leveling of the platform & precise optical alignment of the laser beam. All this reduces the time taken for setup and aids the ease of measurements.
- High quality beam splitter and reflective mirrors – The setup comes with 40 x 40 x 40mm beam splitter cube and 40 x 40mm (98% highly reflective) mirrors for clear fringe pattern.
- 1 micron step movement – The complex double lever mechanism enables a least count of 1 micron in movement of the fixed mirror. Measurement error is less than 5% in wavelength measurement.
INT1-C -
Kjeldahl Unit
Kjeldahl Distillation Unit
A Kjeldahl distillation unit is a laboratory apparatus for determining nitrogen content in organic compounds. This is recognized as the precise and dependable method in various industries, including food, agriculture, and environmental science.
Operations:
1. Check the distilled water level in the steam generator (11).
2. Start the cooling water circulation in the condenser (3).
3. Dilute the digested sample with distilled water (10 – 20 ml) and load it into the inner glass tube
(8) through the dropping funnel (1).
4. Place 25 ml of boric acid solution with the indicator in a 250 ml conical flask at the receiver end
(7).
5. Take 40 ml of 40% alkali and keep it ready in the dropping funnel (1) with the stopcock closed.
6. Check to ascertain that all the rubber tubing is tightly fitted.
7. Now start the steam generator by switching the heater on.
8. The steam generator will now generate steam which passes through the outer jacket tube (9)
and then bubbles into the inner tube (8) which holds the sample.
9. When the steam bubbles vigorously with the digested sample add 40 ml of alkali “immediately”
and close the stop cock.
10. Now the digested sample in the inner tube (8) turns dark brown.
11. Continue the steam distillation until liquid ammonia collects in the boric acid solution. There will
be color changes based on the indicator used. Usually, it will be red
to green. Collect 100 – 120 ml distillate in the conical flask.
12. Switch off the heater and then remove the conical flask and titrate the solution using a burette.
13. Now stop the cooling water circulation in the condenser.
14. Once the heater is switched off, the digested sample automatically gets siphoned into the outer
jacket (9) through the siphoning tube (8).
15. Add distilled water once or twice to rinse and remove the spent reagent which might be present
in the inner tube.
16. The spent reagents which are collected in the outer jacket tube (9) can later be removed by
opening the pinch cock and the next experiment can be started. Normally it takes 5 to 7
minutes for distillation of one sample.KJDU -
Miscellaneous
Infrared Kjeldahl Digestion
These digestion units are compact and well insulated to minimize heat transfer to the surroundings and allow fast, even heating thus giving good working conditions as well as saving energy.
The Kjeldahl method is the official method for determining nitrogen and protein contents in:
- Animal feeds
- Soils, Fertilizers, etc.
- Lubricants, fuel oils, etc.
- Waste water, sludge, etc.
- Foods (Raw materials and finished products)
Features:
- Fitted with quartz infrared heaters
- Ceramic insulation for efficient heating
- 250 mL capacity digestion tubes (quartz).
- PID Controller with auto-tuning to maintain precise temperature.
- Includes rack with handle for easy loading and unloading of digestion tubes.
Technical Specifications:
- Digital PID Controller for precise control
- Input Voltage: 220 V AC ± 10%, 50/60 Hz
Quartz Digestion tubes: Quartz Digestion tubes are excellent for use in Kjeldahl analysis. Unlike borosilicate glass, Quartz can withstand sudden heating and cooling. Quartz tubes can withstand temperatures up to 1000°c and hence boiling Sulfuric acid at 420°c can be easily done without the fear of breakage.
Quartz is better resistant to sulfuric acid attack at elevated temperatures than borosilicate glass.
KJDU-IR-01 -
Micropipettes
Miniature Fixed Volume Micropipettes
Lilpet- Miniature Fixed Volume Pipette with Two Step Plunger Operation. This miniature fixed-volume micropipette is a low-cost. high-precision liquid handling instrument. It offer two-step plunger operation and is specially designed for use with diagnostic kits. The ergonomic and intuitive design of these micropipettes helps in performing sensitive operations with high precision, accuracy and reliability in practical laboratory environments.
- LILPET has an optimum size- 130 mm in length – for high user comfort during pipetting.
- LILPET is fully autoclavable at 121 ° C and 15psi for a duration of 10-15 minutes.
- LILPET is calibrated in an ISO 17025 accredited laboratory according to ISO 8655 standards
LIL -
Micropipettes
Miniature Fixed Volume Micropipettes
Lilpet Pro – Miniature Fixed Volume Pipette with Tip Ejector and Two Step Plunger Operation
This miniature fixed-volume micropipette with tip ejector is ideally suited for all sensitive applications. The tip can be removed easily by the single press of the tip ejector button. The two-step plunger operation ensures last drop dispensing. The ergonomic and intuitive design of these micropipettes helps in performing sensitive operations with high precision, accuracy and reliability in practical laboratory environments.- LILPET has an optimum size –130 mm in length – for high user comfort during pipetting.
- LILPET is fully autoclavable at 121°C and 15 psi for a duration of 10–15 minutes.
- LILPET is calibrated in an ISO 17025 accredited laboratory according to ISO 8655 standards
LILP -
Add on's
CMOS CAMERA IS SERIES
These high-resolution CMOS cameras can be directly integrated into advanced trinocular microscopes. Designed for precision imaging, research, and documentation, these systems offer plug-and-play digital microscopy with powerful IS Series software for real-time image enhancement, 2D measurements, and high-definition imaging.
Model Range & Highlights:
5MP CMOS Camera, IS-500
- Sensor : 1/2.5″ 5.1M/AR0521(C)
- Pixel Size : 2.2×2.2 pm
- FPS/Resolution : 30fps @ 2592×1944, 30fps @ 1280×960, 30fps @ 640×480
- Best For : Routine brightfield applications, teaching labs
- Exposure Range : 0.1 – 1000 ms
- White Balance & Colour Rendering : ROI white balance, ultra fine colour engine
- Power Supply : USB powered (5V)
MA-IS-01 -
Add on's
CMOS CAMERA IS SERIES
These high-resolution CMOS cameras can be directly integrated into advanced trinocular microscopes. Designed for precision imaging, research, and documentation, these systems offer plug-and-play digital microscopy with powerful IS Series software for real-time image enhancement, 2D measurements, and high-definition imaging.
Model Range & Highlights:
12MP CMOS CAMERA, IS-1200
- Sensor : 1/2.3″ 12M/IMX577(C)
- Pixel Size : 1.55×1.55 pm
- FPS/Resolution : 20fps @ 3840×3040, 20fps @ 1920×1520, 20fps @ 960×760
- Best For : Detailed educational and research applications
- Exposure Range : 0.1–2000 ms
- White Balance & Colour Rendering: ROI white balance, ultra fine colour engine
- Power Supply : USB powered (5V)
- Common Software Features (IS Series Software):
· Image enhancement (hue, saturation, contrast, etc.)
· Real-time auto-exposure & white balance
· 2D measurement & calibration
· Compatible with Windows, Mac OS, Linux, Android Multiple Platform
· SDK support for C/C++, C#/VB NET, Python, Java, Direct Show, Twain etc
MA-IS-02 -
Add on's
1.3 MP Digital Imaging Camera
1.3 MP DIGITAL IMAGING CAMERA
A versatile MD-130 entry-level imaging module with a 1/3″ 1.3MP sensor,
ideal for routine microscopy needs.
· Resolution : 1280×1024
· Sensor : 1.3 Mega pixel, 2.2μm pixel size
· Frame Rate : 17fps
· Software : Future Win Joe with editing and management tools
· Spectral Range : 400–650nm (with IR filter)
· Best For : Basic research, education, and documentation
· Output : Image and video captureMA-MD-01 -
Add on's
3.0 MP High Clarity Digital Camera
Designed for mid-range imaging requirements, the MD-300 delivers higher resolution and flexibility with both YUY2 and MJPG output formats.
· Resolution : 2048×1536
· Sensor : 1/2.5″ 3MP, 2.2μm pixel size
· Frame Rate : 15fps
· Spectral Range : 400–650nm (with IR filter)
· Enhanced Preview Options : Multiple resolutions from 352×288 to 2048×1536
· Exposure & White Balance : Manual and auto modes
· Best For : High-school/university research labs and industrial inspectionMA-MD-02 -
Add on's
5.0 MP Professional-Grade Camera
The MD-500 provides outstanding resolution and dynamic range, making it ideal for high-precision applications.
· Resolution : 2592×1944
· Sensor : 1/2.5″ 5MP, 2.2μm pixel size
· Frame Rate : 10fps at full resolution
· Dynamic Range : 70.1dB – superior clarity in varied lighting
· S/N Ratio : 38.1dB
· Best For : Advanced biological research, material analysis, and publication-quality ImagingMA-MD-03 -
Add on's
LabScope Cam HD
1080P Digital Microscope Camera
· Sensor : Sony IMX178, 8MP
· Resolution : 1920×1080 @ 60fps (HDMI), 30fps (USB)
· Image Capture : JPEG, 5M Resolution
· Video Record : 1080P @ 30fps (ASF format)
· Outputs : HDMI 1.4, USB
· Storage : SD Card
· Controls : USB mouse; exposure, white balance, colour, sharpness
· Features : Zoom, Mirror, Freeze, Crosshair, ComparisonMA-SC-01
+1 (630) 345-3450