-
Micropipettes
Miniature Fixed Volume Micropipette
Low-cost miniature fixed-volume pipettes are specially designed for use with Diagnostic Kits.
FEATURES :
Fully Autoclavable
- Each pipette is individually calibrated as per ISO 8655 standards.
- Color-coded for different volumes for easy identification in laboratory environment.
- Two-step plunger operation facilitates super blow-out from the tip (last drop dispensing), resulting in very high accuracy & precision.
- This also allows these pipettes to be used for reverse pipetting and repetitive pipetting. 130 mm in length which is an optimum size for user comfort during pipetting.
MM -
Separation
MiniSpin 32R/24V
The MiniSpin 32R (refrigerated) and MiniSpin 24V (ventilated) minicentrifuges are precision instruments crafted for high-speed performance in molecular biology, clinical diagnostics, and
research labs. Designed to accommodate microliter tubes and PCR kits, these compact systems combine robust engineering with intuitive digital control for superior separation results.Features:
- High Capacity & Heavy-Duty Machines: Engineered to handle up to 80 mL with rotor configurations supporting 10 × 8 mL tubes
- High RPM & RCF Output: These centrifuges support high rotational speeds and relative centrifugal force (RCF), e nabling effective separation of even the most challenging sample
types. - Available with refrigeration option.
- Refrigerated model uses eco-friendly, CFC-free R-134a refrigerant.
- Automatic rotor recognition ensures accurate RCF calculation and safe operation.
- Salient Features: Emergency Lid Opening, Rotor Cycle Counting, Solid Counter-Balanced Hinges, Imbalance Detection, Motor Overload Protection, Stainless Steel Chamber with Guard
Ring, Error Detection System - Intuitive user interface with bright digital display
- Features programmable timer up to 99 hours, 59 minutes, and 59 seconds
- Store up to 99 user-defined protocols for fast setup and repeatability of routine applications.
- Low operating noise levels.
- Features Brushless Induction Motor
- Multiple Acceleration & Braking Profiles Options
- Supports multiple rotors (Not included)
- CE Certified
MNS -
Membrane Filters
Membrane Filters
Membrane filters are widely used to sterilize liquids. It is an effective, accepted technique for the filtration of fluid samples. We can determine the quality of water and the quantity of microorganisms by using this membrane filter. It is also known as the molecular or biological filter.
Applications of Membrane Filters
- Chemical Processing : Purification and separation.
- Wastewater Treatment : Contaminant removal.
- Food & Beverage : Liquid clarification.
- Pharmaceuticals & Biotech : Sterilization and purification.
- Microbiology : Isolating and counting microorganisms in samples.
MNY02 -
Mixing
Multi-Position Magnetic HotPlate Magnetic Stirrer
The multiple hotplate magnetic stirrer allows simultaneous heating and stirring of several samples with uniform performance, ideal for parallel experiments in chemistry and biology labs.
Features:
- Stainless-steel 304 top
- Independent control of speed and time for each station; heating is uniform across all stations
- Brushless motor
- LCD display
- Built-in plate probe regulates heating for all positions
- Synchronous mode available for RPM and timer
- Maximum capacity per position: 500 ml
Technical Specifications:
- Speed Range: 50 – 1200 rpm
- Mixing Direction: Clockwise
- Heating Temperature Range: Ambient +5 °C to 120 °C
- Timer Range: 1 min – 20h
- Stir Bar Size: 30 mm
- Safety: Over-temperature protection
- Power Supply: AC 220 V, 50/60 Hz
MPMHS -
Mixing
Multi-Position Magnetic Hotplate Stirrer
The multiple hotplate magnetic stirrer is designed for laboratories that require simultaneous heating and stirring of multiple samples. Equipped with a durable ceramic-coated plate, brushless motors, and independent controls for each station, it ensures uniform heating and mixing across all positions. Ideal for parallel experiments in chemistry, biology, and research labs.
Product Features:
- Ceramic coated stainless-steel top
- Each station’s temperature, speed and time can be set independently.
- Brushless motor
- LCD display
- Built-in plate probe and external Pt100 probe for liquid.
- Adjustable stirring speed and heating range for diverse applications
- Supports synchronous operation to control all stations together.
- Over-temperature protection and anti-slip design
- Maximum capacity per position: 2L
- Includes support rods, clamps & Pt1000 probe
Technical Specifications:
- Speed Range: 0 – 1500 rpm
- Working plate size Ø135mm
- Mixing Direction: Clockwise
- No. of Positions: 4
- Heating Temperature Range: Ambient +5 °C to 310 °C
- Timer Range: 1 min – 24h
- Stir Bar Size: 30 mm
- Safety: Over-temperature protection
- Power Supply: AC 220 V, 50/60 Hz
MPMHS-D-4CT -
Mixing
Multi-Position Magnetic Stirrer
The multi-position magnetic stirrer is a reliable and efficient instrument designed for simultaneous stirring of multiple samples. It features a brushless motor, LCD display, and timing functionality, supporting both synchronous and asynchronous operation. Each station can handle up to 500 mL, ideal for high-throughput laboratory processes.
Product Features:
- PET anti-corrosion plate ensures durability and resistance against chemical spills.
- LCD display shows real-time rpm and timer for each station
- Each station speed and time can be set independently.
- Supports synchronous operation to control all stations together.
- Brushless motor
- Maximum capacity per position: 500 mL
Technical Specifications:
- Speed Range: 50–1500 rpm
- Mixing Direction: Clockwise
- Stir Bar Size: 30 mm
- Timer Range: 1 min – 19 h 59 min
- Power Supply: AC 220 V / 110 V, 50/60 Hz
MPS -
Mixing
Multi-Position Magnetic Stirrer 4 position Glass Top
The MPS-4GT is a 4-position digital magnetic stirrer designed for parallel mixing of multiple samples. Each station can be operated synchronously or asynchronously, with adjustable speed
and timing.Features:
- Tempered glass panel with capacitive touch controls
- LCD display shows real-time rpm and timer for each station
- Each station speed and time can be set independently.
- Key lock prevents accidental changes
- Supports synchronous operation to control all stations together.
- Brushless motor
- Maximum capacity per position: 1000 mL
Technical Specifications:
- Speed Range: 50–1500 rpm
- Mixing Direction: Clockwise
- Stir Bar Size: 30 mm
- Timer Range: 1 min – 24h
- Power Supply: AC 220 V, 50/60 Hz
MPS -
Mixing
Muti-Position Magnetic Stirrer 15 Position
The MPS-4GT is a 4-position digital magnetic stirrer designed for parallel mixing of multiple samples. Each station can be operated synchronously or asynchronously, with adjustable speed
and timing.Features:
- PET anti-corrosion plate ensures durability and resistance against chemical spills.
- LCD display shows real-time rpm and timer for each station
- Each station speed and time can be set independently.
- Supports synchronous operation to control all stations together.
- Brushless motor
- Maximum capacity per position: 15×250 mL / 8x500ml
Technical Specifications:
- Speed Range: 50–1500 rpm
- Mixing Direction: Clockwise
- Stir Bar Size: 30 mm
- Timer Range: 1 min – 19 h 59 min
- Power Supply: AC 220 V, 50/60 Hz
MPS-15 -
Mixing
Magnetic Stirrer 2 Liters, Digital
Stirrers are used in laboratory to mix liquid solutions and thereby speed up reactions.
Features:
- Digital RPM display
- Stainless steel top surface
- Spill resistant design
- Includes PTFE coated stirring bar
- Consistent performance at low speeds
- Uniform speed control across the range
- Helpful in mixing liquids, solid liquid without influence of external heating (for heat sensitive amples)
Technical Specifications:
- CE certified
- Maximum capacity: Up to 2 L
- Stirring speed: 150 – 1500 RPM
- Input voltage: 220 V AC ±10%, 50/60 Hz
MS-D-2L -
Pipette Filling Devices
Pipette Filling Devices
EASYFILL, an electronic pipette filling equipment, is a simple yet powerful blend of sophisticated features and functionality. It offers Single Knob Dual Dispensing Mode. EASYFILL helps in performing sensitive operations with high precision, accuracy and reliability in practical laboratory environments
- EASYFILL has a Universal Silicon Adapter, with internal knurling, that can easily accommodate pipettes from 1 ml to 100 ml and hold them firmly during liquid handling operations.
- Red LED flash denotes ‘low battery’ and green LED flash denotes ‘charging’.
- The instrument offers Dual Dispensing Mode with the help of a Single Knob.
- Press the knob fully for dispensing at maximum speed. This mode engages the motor.
- EASYFILL has a comfortable grip and exhibits high ease of use.
- The instrument offers continuous pump speed adjustment during liquid handling operations.
- The Collet Assembly and the 0.2 microns In-line Membrane Filter, contained within it, are fully autoclavable at 121°C temperature and 15 psi for a duration of 10-15 minutes.
NE-GG-220V -
Accessories
Optical Bench
A versatile and modular system that can be utilized across many experiments. The optical bench has three core parts: Rail, Mounts, and Uprights. All the core parts have been designed in such a way that they are suitable for multiple types of experiments.
KEY FEATURES
- Excellent stability and easy set-up of the optical bench – Mounts can be fixed to the rail by just aligning and sliding two screws into the rail and fastened. The uprights can be placed and fastened at any desired position with ease
- Height adjustable mounts – The optical bench is designed with three-point mounts, with two of their height adjustable and lockable with a range of 20 mm. The height adjustment gives precision in maintaining the horizontal axis of the bench. The mount bases are rubber padded to avoid sliding the optical bench on the lab benches.
- Anti-rotation square holders on the uprights (Patent Pending) – The optical bench uprights are designed with square holders and square shafts for holding accessories. One of the major needs in optical experiments is to maintain the alignment of accessories. More often, the accessory holder is susceptible to rotation. Square shafts ensure the anti-rotation of the accessories and make experimenting hassle-free. It also avoids any kind of lateral bend or movement of the accessories.
- All parts are scratch-resistant and the movement of uprights on the rail is seamless.
OB1 -
Oven
Laboratory Oven
A digital laboratory oven is used for high-volume thermal convection applications. The inner chamber is performed for natural conventional airflow which assures constant temperature in the system. Temperature up to 250°C. Standard double wall fabrication. The inner chamber is made out of a highly polished stainless-steel sheet and the outer is made out of mild steel finished in white stoving enamel. The gap between the two walls is filled with high-grade glass wool.
Features:
- Process Timer
- Fan failure alert
- Stainless steel interior
- Powder-coated exterior
- Caster wheels for easy movement (Optional)
- PID controller for precise temperature control
- Adjustable perforated shelves made of stainless steel
- Superior insulation for lower energy consumption and better performance
- Forced air convection produces faster temperature response rates, improves uniformity and reduces fluctuation
Technical Specifications:
- CE certified
- Overload protection
- Timer: Upto 9999 minutes
- Maximum shelf load: 15 Kg
- Temperature accuracy ± 1°C
- Input voltage: 220 V AC ± 10%, 50/60 Hz
- Temperature range: ambient +5° to 250°C, Resolution 1°C
CH11810F
Note: Stainless Steel Ovens are available on request.
OV -
Heating & Tempering
Laboratory Oven, Digital
Digital hot air oven designed for drying, sterilization, and general laboratory heating applications. The oven provides uniform temperature distribution through forced air circulation, ensuring
reliable and repeatable results. Ideal for material testing, glassware drying, and heat treatment processes in research and industrial laboratories.Features:
- Temperature range Ambient +5°C to +300 °C
- Excellent temperature stability
- Internal air circulation
- Deep-drawn ribs for secure SS shelf placement
- Ergonomic handle for ease of use
- Optimized insulation for efficient temperature control and energy savings
- Supplied with mesh trays as standard
Technical Specifications:
- Temperature Range: Amb+5° to 300°C, Resolution 0.1°C
- Timer: Up to 9999 mins
- Temperature Accuracy: ±1 °C
- Input voltage: 220 V AC ± 10%, 50/60 Hz
- CE certified
OV-D -
Experiments
Photoconductivity Experiment
Objectives
To study the photoconductivity of CdS Photoresistor, in the following conditions:
- Applied voltage vs photocurrent (IPH) at constant irradiance (Φ).
- Photocurrent (IPH) vs irradiance (Φ) at a constant applied voltage (V).
Principle
The phenomenon of photoconductivity occurs when an incident light shown upon a semiconductor causes an increase in its electrical conductivity. This is because of the excitation of electrons across the energy gap into the conduction band, which leads to an increase in the number of free carriers in the conduction band, hence, an increase in the conductivity of the semiconductor. Here, we can study the characteristics of the CdS photoresistor under different conditions of light intensity and applied voltage.
KEY FEATURES
- Precise Optical Alignment: The optical alignment of the components is attained by the optical bench, the set-up time is faster and experimentation is easy.
- Fine and Easy Light Intensity Adjustment: Light intensity adjustment is done via the use of two polarizers. This helps in easier and fine light intensity adjustments.
- Simple and Easy Connections: The color-coded terminals on the various components aid in the ease of connections thus reducing the setup time.
WHAT YOU NEED
- OB2 Optical Bench Set 0.4m 1
- HA001 Light Source Holder 1
- HA004 Polarizer Holder 1
- HA006 Analyzer Holder 1
- HA020 LDR Module Holder 1
- PH61022D/20 Power Supply, 0-15V, 200mA 1
- PH61022D/2 Power Supply for Light Source 1
- PCE1-C: Complete Equipment Set With Instruction Manual
PCE1-C
+1 (630) 345-3450