-
Accessories
Quarter Wave Plate Holder
The holder is designed to hold a 22mm quarter-wave plate. A waveplate is an optical device that alters the polarization state of a light wave traveling through it. The quarter-wave changes the phase difference between the two components of polarized light traversing it by one-fourth cycle.
HA030 -
Accessories
Half Wave Plate Holder
The holder is designed to hold a 22mm half-wave plate. A waveplate is an optical device that alters the polarization state of a light wave traveling through it. Half-wave plate, reduces by ¹/₂ cycle, the phase difference between the two components of polarized light traversing it.
HA031 -
Accessories
Light Sensor Holder
Light sensor module for use with rotating table assembly (UP030). The light sensor when used with Data Processor measures light intensity at various angles of reflection and gives a continuous smooth curve of angle vs light intensity. The meter reads with a precision of 1 lux.
HA511 -
Accessories
Travelling Light Sensor Holder
Travelling Light Sensor Holder, mounted on the square rod, can be held upright on the optical bench. When used with Data Processor (DP1), this holder measures the light intensity of various orders (like 1st, 2nd, and so on) of the interference patterns formed by diffusing light by any obstacle or opening.
Specifications
Least count – 1 LuxHA512 -
Heating Mantles
Heating Mantles, Digital
Heating mantles are used to uniformly heat liquids placed in round bottom flasks. Insert the external probe in the liquid solution and measure/control the temperature of liquid directly with these highly accurate digital heating mantles.
Product Features:
- With non-slip rubber feet
- Temperature probe PT100
- For use with round bottom flasks
- Includes support rods and boss head
- Precise temperature control with PID controller
- LED display for showing actual and set temperature
- Measure and control the temperature of liquid directly
- Outer body is made from powder-coated rolled aluminium
- Glass fibre yarn knitted heating element provides uniform heating to the flask
Technical Specifications:
- CE certified
- Overload protection
- Input voltage: 220 V AC ± 10%, 50/60 Hz
- Temperature accuracy ± 0.5°C, Resolution 0.1°C
- Temperature range of PT100: Ambient + 5°C to 250°C
- Temperature range of heating surface: Ambient + 5°C to 400°CCH11161D
Note: The heating element cording may be slightly brown in color. This is a result of testing during the QC process.
HM-D -
Separation
Hematocrit Centrifuge
Supertek’s Hematocrit Centrifuge is a compact digital centrifuge designed specifically for hematocrit determinations. It offers high-speed operation with accurate control, and is compatible
with 75 mm capillary tubes, ideal for clinical and diagnostic labs.Features:
- Compatible with 75 mm hematocrit capillaries.
- Wide speed range for flexible applications.
- LCD display for easy monitoring.
- Compact and maintenance-free design.
- Lid lock and auto stop for safety.
- Easy installation of rotor..
Technical Specifications:
- Speed range: 500 – 12,000 RPM
- Max RCF: 13,680 x g
- Timer 30sec-99 mins
- Rotor Compatibility: Fits 75 mm Capillary Tubes, 24 Nos
- Input Power: 110-220 V AC ±10%, 50/60 Hz
HMC -
Heating Mantles
Fabric Heating Mantle Controller
Control the heat output of the fabric heating mantles with this controller.
Features:
- For use with fabric heating mantles
- Compact and safe design
- Adjustable knob for heat control
- Up to 1.6 kW load can be controlled
- Input voltage: 220 V AC ± 10%, 50-60 Hz
- CE certified
CH11160C
HMFAB-CNT -
Heating Mantles
Heating Mantles, Multi-position
supertek’s multi-position heating mantle is a reliable and space-saving heating solution designed to simultaneously heat multiple round-bottom glassware containers in a
laboratory. This heating mantle is ideal for parallel processes such as reactions, distillations, syntheses etc.Product Features:
- Space-saving design
- With non-slip rubber feet
- Available in 3 and 6 positions
- For use with round bottom flasks
- Includes support rods and boss heads
- Outer body is made of powder-coated mild steel
- Each position has an independent heat control knob
- Heat is controlled with in-built electronic circuit card
- Glass fiber yarn knitted heating element offer uniform heating
Technical Specifications:
- CE certified
- Overload protection
- Input voltage: 220 V AC ± 10%, 50/60 Hz
- Temperature range of heating surface: Ambient + 5°C to 400°C
CH11162A
Note: The heating element cording may be slightly brown in color. This is a result of testing during the QC process.
HMMP-A -
Heating Mantles
Heating Mantles, Analog
Supertek’s heating mantle is a dependable and cost-effective solution for your laboratory’s basic heating requirements. Designed for use with round-bottom glassware, it provides efficient uniform heating for a wide range of applications. It is supplied with a robust MS (mild steel) rectangular body for improved strength, stability and a uniform design across the range.
Product Features:
- With non-slip rubber feet
- For use with round bottom flasks
- Includes support rods and boss head
- Heat liquid solutions placed in round bottom flasks
- Heat is controlled with an in-built electronic circuit card
- The outer body is made from powder-coated MS (mild steel), rectangular construction
- Glass fibre yarn knitted heating element provides uniform heating to the flask
Technical Specifications:
- CE Marked/CE Compliant
- Overload protection
- Input voltage: 220 V AC ± 10%, 50/60 Hz
- Temperature range of heating surface: Ambient + 5°C to 400°C
- IP Rating: IP20
Note: Heating element cording may be slightly brown in colour due to QC testing.
Scope of Supply
- Main unit
- Instruction Manual
- Power cord
- Support rod
- Boss head
- Probe clamp
HMRT -
Heating Mantles
Heating Mantle with Stirrer, Analog
supertek’s heating mantle with stirrer is ideal for laboratories that require simultaneous heating and stirring of liquid solutions placed in round bottom flasks
Features:
- With non-slip rubber feet
- For use with round bottom flasks
- Stirring is done using a magnetic bar
- Includes support rods and boss heads
- Glass fiber yarn knitted heating element provides uniform heating to the flask
- Heat and stir liquid solutions simultaneously
- Integrated electronic circuit card for heating and stirring
- Outer body is made from powder-coated rolled aluminium
Technical Specifications:
- CE certified
- Overload protection
- Stirring speed: Upto 1200 RPM
- Input voltage: 220 V AC ± 10%, 50/60 Hz
- Temperature range of heating surface: Ambient + 5°C to 400°C
Note: The heating element cording may be slightly brown in color. This is a result of testing during the QC process.
CH11172
HMS -
Mixing
Heating Mantle with Stirrer, Digital
supertek’s digital heating mantle with magnetic stirrer offers precise PID temperature control together with adjustable magnetic stirring in a single unit. Insert the PT100 probe to measure and control the liquid temperature directly. Supplied with a robust MS (mild steel) rectangular body.
Features:
- With non-slip rubber feet
- Temperature probe PT100
- For use with round bottom flasks
- Includes support rods and boss head
- Precise temperature control with PID controller
- LED display for showing actual and set temperature
- Built-in magnetic stirrer with adjustable stirring speed
- Independent temperature and stirring speed control
- Outer body is made from powder-coated MS (mild steel), rectangular construction
- Glass fibre yarn knitted heating element provides uniform heating to the flask
Technical Specifications:
- CE Marked/Compliant
- Overload protection
- Input voltage: 220 V AC ± 10%, 50/60 Hz
- Temperature accuracy ± 0.5°C, Resolution 0.1°C
- Temperature range of PT100: Ambient + 5°C to 250°C
- Stirring speed: Upto 1200 RPM
- Temperature range of heating surface: Ambient + 5°C to 400°C
- Timer: Up to 9999 mins
- IP Rating: IP20
Note: Heating element cording may be slightly brown in colour due to QC testing.H111
HMS-D -
Heating & Tempering
Heat-On Block System
Efficient and safe heating blocks for round-bottom flasks (50 ml to 5000 ml), made from anodized aluminum for excellent heat transfer and chemical resistance. Compatible with all major hotplate stirrers. Eliminates messy oil baths, ensures uniform heating, and saves energy.
Product Features:
- Designed for safe, clean, and energy-efficient heating of Round Bottom Flasks (RBF) from 50 ml to 5000 ml.
- Manufactured from high-grade Aluminium for excellent heat conduction and durability.
- Available in Anodized Silver Finish
- Deep cavity design for maximum flask contact ensuring uniform heating.
- Compatible with all leading Hot Plate Stirrers up to 135 mm diameter.
- Equipped with a Temperature Sensor hole (3 mm Ø) for direct probe insertion.
- Reduced energy consumption compared to oil baths.
- Zero oil contamination, zero maintenance.
- Optional lifting handles for safe removal
Technical Specifications:
- Material – Aluminium
- Finish – Silver Anodizing
- Flask Holding Capacity – 50 ml, 100 ml, 250 ml, 500 ml, 1000 ml, 2000 ml, 3000 ml, 5000 ml.
- Maximum Temperature – Use Upto 260°C
HOB -
Heating & Tempering
Laboratory Hot Plate, Round
supertek’s laboratory hot plate is a reliable heating equipment designed for a wide range of laboratory applications. This instrument provides a durable and uniform heating
platform, making it excellent for a variety of processes such as sample preparation, chemical reactions, material testing, etc.Product Features:
- With non-slip rubber feet
- Includes support rods and clamps
- Round-shaped, cast-iron heating plate
- For general-purpose heating requirements
- MOC Body: Powder-coated mild steel body
- Heat is controlled with an in-built electronic circuit card
Technical Specifications:
- CE certified
- Overload protection
- Input voltage: 220 V AC ± 10%, 50/60 Hz
- Temperature range of hot plate: Ambient + 5°C to 350°C
CH11168B
HPR-A-8
+1 (630) 345-3450